Going for a bike ride is an excellent way to exercise. The strain on knees and shins caused by running can be relieved by going for a ride. Traditional bikes like ten-speeds are often the first thought of most new riders, but there has been a strong surge towards recumbent bicycles. The design is different because they allow you to sit back and enjoy the scenery. Before your first ride, there are a few differences that you need to learn.
First, mounting and dismounting are different. You need to swing your leg forward instead of backward over the frame. If you swing the leg backward, you may hit the reclining seat and probably fall over.
Before you start the ride it is important to adjust it for your fit. Set your handlebars and seat so that you can reach the handlebars and pedals without having to lean forward. This will allow you to sit back and enjoy the ride without struggling.
Be sure to hold the brake when getting on or off. This may seem like common sense, but it is more important on this style of bike. Until you are used to getting on the bike, this will simplify the first and last step of the ride.
This cycle is not designed to stress you while you ride. With this in mind, be sure to start in a low gear and use the gears appropriately to be able to enjoy your ride. You can get great exercise without having to be a speed demon.
Set your pedal angle before starting. While sitting on the seat, spin the pedal to 12 o'clock, straight up and down, so you can have the best push effort when you start riding. Some might suggest a 2 o'clock position, but having the pedal straight up gives you better starting power.
Sit back, relax, and enjoy the ride. The whole idea of this type of cycle is to be able to look up and around while you are riding. You don't have to be hunched over the bars and front wheel anymore.
Push off with your pedal, not your foot. Many traditional rides begin by pushing off with the foot that is planted on the ground. With this type of ride, you are not in a strong position to push off with the ground foot. Instead, start pedaling and immediately move the ground foot to the other pedal to get going.
Stopping is more difficult at first. With other types of cycles, you put on the brakes and put one foot on the ground and lean the bike. With this one, you want to apply the brakes and plant both feet on the ground, almost standing up. Be sure to straighten the wheels or the bike may fall over.
This is one of the most enjoyable ways to go on a cycle ride. You can relax in the reclining position and once you get used to the differences you will find that you are not nearly as tired after a ride. You will usually end up going farther, on longer rides. You will also be able to enjoy the scenery since you are looking up instead of hunched over, looking at the ground.
First, mounting and dismounting are different. You need to swing your leg forward instead of backward over the frame. If you swing the leg backward, you may hit the reclining seat and probably fall over.
Before you start the ride it is important to adjust it for your fit. Set your handlebars and seat so that you can reach the handlebars and pedals without having to lean forward. This will allow you to sit back and enjoy the ride without struggling.
Be sure to hold the brake when getting on or off. This may seem like common sense, but it is more important on this style of bike. Until you are used to getting on the bike, this will simplify the first and last step of the ride.
This cycle is not designed to stress you while you ride. With this in mind, be sure to start in a low gear and use the gears appropriately to be able to enjoy your ride. You can get great exercise without having to be a speed demon.
Set your pedal angle before starting. While sitting on the seat, spin the pedal to 12 o'clock, straight up and down, so you can have the best push effort when you start riding. Some might suggest a 2 o'clock position, but having the pedal straight up gives you better starting power.
Sit back, relax, and enjoy the ride. The whole idea of this type of cycle is to be able to look up and around while you are riding. You don't have to be hunched over the bars and front wheel anymore.
Push off with your pedal, not your foot. Many traditional rides begin by pushing off with the foot that is planted on the ground. With this type of ride, you are not in a strong position to push off with the ground foot. Instead, start pedaling and immediately move the ground foot to the other pedal to get going.
Stopping is more difficult at first. With other types of cycles, you put on the brakes and put one foot on the ground and lean the bike. With this one, you want to apply the brakes and plant both feet on the ground, almost standing up. Be sure to straighten the wheels or the bike may fall over.
This is one of the most enjoyable ways to go on a cycle ride. You can relax in the reclining position and once you get used to the differences you will find that you are not nearly as tired after a ride. You will usually end up going farther, on longer rides. You will also be able to enjoy the scenery since you are looking up instead of hunched over, looking at the ground.
About the Author:
You can get a detailed overview of the things to consider when buying recumbent bicycles and view our selection of bicycles at http://www.utahtrikes.com/PROD-11617617.html right now.
No comments:
Post a Comment